Jay Fisher - Fine Custom Knives

New to the website? Start Here
"Skeg"  tactical, counterterrorism, crossover knife, obverse side view in T4 Cryogenically treated ATS-34 high molybdenum martensitic stainless steel blade, 304 stainless steel bolsters, white and black tortoiseshell pattern G10 fiberglass/epoxy composite handle, hybrid tension tab-locking sheath in kydex, anodized aluminum, black oxide stainless steel and anodized titanium
"Skeg"

Cybele

"Cybele" fillet, boning, chef's, carving, collector's knife, obverse side view in 440C high chromium stainless steel blade, 304 stainless steel bolsters, Unakite gemstone handle, lizard skin inlaid in hand-carved leather sheath
"Cybele" Fillet, Boning, Chef's, Carving Knife
  • Size: Length overall: 11.75" (29.9 cm), Blade Length: 7.5" (19.1 cm), Thickness: .124" (3.1 mm)
  • Weight: Knife: 9.5 oz. (269 grams) Sheath: 5.4 oz. (153 grams)
  • Blade: 440C High Chromium Martensitic Stainless Tool Steel, Hardened and Tempered to 57HRC
  • Bolsters, Fittings: 304 Austenitic Stainless Steel
  • Handle: Unakite Gemstone (epidotized granite)
  • Sheath: Hand-carved Leather inlaid with Brown Lizard skin
  • Knife: Named for a Roman mother earth goddess, the Cybele pattern is a fine, comfortable and useful fillet, boning, carving, and chef's knife design. I made this Cybele in 440C high chromium martensitic stainless tool steel blade, hardened and tempered to 57HRC for tough and limited flexibility, with great wear resistance. The knife has a slender and thin hollow ground blade, with plenty of curves and a stinging sharp point. The blade is brightly and evenly mirror polished with balanced and matched hollow grinds, even and curved grind radius terminations, and a tapering spine for support at the sharply angled tip. The geometry of this knife allows a more robust grind at the tip and a more slender grind at the main cutting edge for increased point strength. The knife is clean and smooth with no filework to trap and hold debris, and the tang is fully milled and tapered for balance. The knife is bolstered with zero-care 304 austenitic stainless steel for longevity and great toughness, and the bolsters support noticeable quillons for comfort. The handle is full and round with plenty of belly, feeling great in the hand. The bolsters are dovetailed and bed a pair of bright Unakite gemstone handle scales. The Unakite has sea greens and salmon colored granites, and reminded me of just what a fillet knife should say: green water and salmon! This uniquely American gemstone is from the Appalachian Mountains, and is green epidote and pink, rose, and salmon colored feldspar with a bit of quartz. The name comes from the Unaka Mountains in Tennessee, and is an Indian name. The handle has a bright glassy polish, is solid and cool, and feels great in the hand, with the balance point at the forefinger in a forward grip.
  • Sheath: The knife has a commensurate sheath, made of 9-10 oz. leather shoulder, dyed black, hand-stitched with polyester sinew, lacquered and sealed, with panel inlays of dark chocolate brown lizard skin, smooth and glassy. The sheath protects the keen blade while displaying the gemstone handle and even has inlays on the back, and in the large and long belt loop.
  • A beautiful and useful knife for the kitchen or for tasks requiring the thinnest, sharpest blades, suitable for a collection.

Thanks, Ulises Magana!

Hello Jay,
I have been using Cybele, holding Cybele, and trying to learn how it was created (specially its edge) by observing. This is a review of your knife; one of many. To give only one would be a ridiculous insult, it is not a meal that is eaten and then gone and remembered (I will probably never have a chance to remember this blade of yours and mine, because it will outlast me). While both a meal and a knife can be masterpieces, the time in which each is experienced is different. I am glad that you exist.

  • I have held it for every waking moment that I am home; holding it, waving it, running my fingers across its edge, and looking at the multi-planar surface of its edge.
  • Cut potatoes, apples, pumpkins, tomatoes into a extra fine brunoise, and spinach into a ridiculously thin chiffonade.
  • felt its edge before and after using it. Usually the edge changes (with a regular knife), but no noticeable change was found with Cybele.
  • I've held it in every way I could think of; in a pinch grip, forward grip, a glide grip (which is used mainly for delicate or hard to cut food due to its decreased traction when pressure is applied to it, such as squid, seaweed, nori, dried limes, soaked dates. These foods are common to me by the way)
  • I have tried to imbue it with as much of my energy as possible.

When I opened the FedEx package I was confused at what I was holding in my hand. Heavy...well heavier. I held it for hours before I cut anything with it, I slapped the blade against my hand, knocked it with my knuckles. I had never experienced a knife made of this steel before. Nor one made this well. Its shape still confused me though. It felt the most natural when held in a forward grip I was unsure if the handle was any good at all. I held my other knives in comparison and soon I started to dislike them. The knives I had had so much experience with and had done things so well with, were nothing in comparison to the cuts full of finesse I was making with Cybele, a knife I had never played with.

I wasn't having to accommodate for the knife, finally the knife was doing as I commanded. I will send you a video so you can see Cybele in action. I have broken down many fish, and I am waiting for a good sized opportunity to test how it will do with a large one (TUNA :) ), since its design is better suited for that. As a Chef knife it falls short because of its height, the amount of clearance in height for your fingers between the edge beginning after the choil and the belly of the knife, and its pivot point has a significantly decreased edge sharpness. Usually with a Chef's knife because it is quite large and tall you are able to easily curl your fingers and rest your proximal joints against the side of the blade. With Cybele this is not possible and the alternative is to rest the top surface of your intermediate phalanges at about 110-120 degree angle. This is not bad but it is not the most desirable for someone like me who can go a great speeds with a knife; the upward force exerted against my fingers can sting and burn from the rubbing. But, I experienced this from the up and down rubbing against my joints from larger Chef knives so the trade of is not bad.

I am a small guy, I am 5 foot 5 inches. My hands are small my fingers are not thick, and I bump or squish my fingers against the cutting board when trying to use the full length of Cybele's edge. Since Cybele has a curved blade the percentage of the actual edge that comes in contact with the surface of the cutting board is about 33%. A percentage similar to this is inherent with almost all cooking knives, but with Cybele in order to use the last third of the cutting edge the handles rear quillon needs to come down millimeters away from the cutting board. This does not leave enough room for my fingers. So, I have to remove them from the belly of the knife and switch to a glide grip (where the blade is held by the sides), again not bad; but not Great. Then, usually the Chef's knife pivot point is at the tip of the blade, in Cybele there exists two pivot points (the stinging trailing point (I think that's what its called) and the transition point/tanto blade ) The one usurping the traditional tip of a Chefs knife is that transition point; it is not as sharp as the rest of the blade. Dragging the knife along this point can cause ripping and not cutting of food stuff (though I see that the primary edge was continued farther up well into the beginning of the secondary edge).

-8/12/12
I wrote the previous paragraph thinking I understood Cybele having used it. But, cutting with it is a delightful experience. Every cut is exact, every slice is even, every dice looks like it was machine cut, and every piece of food minced has absolutely defined borders. Cybele is not the sharpest, fastest, thinnest; but overall it is the best by very very VERY far. Usually you would expect to teach the blade. Use it wear out the edge, train the edge, smooth in the middle from wear and deliciously sharp at the tip from occasional wear. The change in Cybele's edge is the least detectable that I have ever experienced. Knives to me are like nails to fingers, I can feel exactly where every part of the knife is. I have never had a blade with such a great fit. I hate hidden tang blades for this reason (but I'll hold my tongue since I have not had yours), the transference of force is not good. Often the transition and loss of force from blade, to handle, from handle to hand is to great. Even with full tang forged blades I have never had such great transference of energy. I was never a butcher, and I now am able to crack atoms and see inside them with Cybele.

It is a very releasing experience to use Cybele while cooking because the blade has tamed me, Cybele has taught me. I am incredibly fast and precise with every knife that I own, but I have never felt the need to slow down and enjoy the cut. A lot of the problems I faced with my fingers not having enough space were almost all gone because I reduced the speed of my cutting.

All my blades have "para aprender" etched on them that only I can see, Cybele is the only blade that has it physically engraved. The reason for it being written in Spanish is because of its double meaning; for the sake of learning and for learning with (meaning Cybele is a tool to be used for learning).

-9/6/12
Thank you so much, I want to continue ordering and working on the rest of my future knives with you. It is a great feeling to come home tired as hell from a 16 hour shift and go to my kitchen and cook for even longer and more enjoyable hours than ever before. I want you to do me a favor, if you will allow it; every time I purchase potential (a knife) from you I want you to put my full name on the page of every knife that I purchase from you. I am a proud owner of your work! We need to have a long talk as to how this project of mine is going to come to fruition.

thank you,
Ulises Magana


Please click on thumbnail knife photos
"Cybele" fillet, carving, boning, chef's, collector's knife, reverse side view. Note lizard skin inlays on sheath back and belt loop "Cybele" spine tang detial. Spine is clean and polished, fully tapered tang, dovetailed stainless steel bolsters "Cybele" inside handle tang detail. Unakite gemstone is bedded in handle, and is tough granite of epidote and feldspar "Cybele" obverse side handle detail. Handle is full and curvy, with plenty of belly and locks in the hand solidly "Cybele" reverse side handle detail. Note large crystals of epidote and feldspar with quartz on this uniqe granite gemstone knife handle "Cybele" handle close-up. Epidote is sea-green, feldspar is salmon colored, quartz is milky to clear in this granite structure "Cybele" sheathed view. Sheath protects the blade edge and point, and displays bright Unakite handle. Lizard panels are full and slick, inlaid in front and back "Cybele" sheath mouth view. The handle of Cybele is rounded and full, with plenty of curves and comfort. "Cybele" has an extremely sharp point, with nice curves at the cutting edges.

Back to Featured Knives Pages

Back to Chef's Knives Page


XHTML 1.0 Validated, Compliant, Link Checked, and CSS Level 2.1 Validated through W3C, the World Wide Web Consortium
Main Purchase Tactical Specific Types Technical More
Home Page Where's My Knife, Jay? Current Tactical Knives for Sale The Awe of the Blade Knife Patterns My Photography
Website Overview Current Knives for Sale Tactical, Combat Knife Portal Museum Pieces Knife Pattern Alphabetic List Photographic Services
My Mission My Knife Prices All Tactical, Combat Knives Investment, Collector's Knives Copyright and Knives Photographic Images
The Finest Knives and You How To Order Counterterrorism Knives Daggers Knife Anatomy  
Featured Knives: Page One Purchase Finished Knives  Professional, Military Commemoratives Swords Custom Knives  
Featured Knives: Page Two Order Custom Knives USAF Pararescue Knives Folding Knives Modern Knifemaking Technology My Writing
Featured Knives: Page Three Knife Sales Policy USAF Pararescue "PJ- Light" Chef's Knives Factory vs. Handmade Knives First Novel
Featured Knives: Older/Early Bank Transfers  27th Air Force Special Operations  Food Safety, Kitchen, Chef's Knives Six Distinctions of Fine Knives Second Novel
Email Jay Fisher Custom Knife Design Fee Khukris: Combat, Survival, Art Hunting Knives Knife Styles Knife Book
Contact, Locate Jay Fisher Delivery Times Serrations Working Knives Jay's Internet Stats  
FAQs My Shipping Method Grip Styles, Hand Sizing Khukris The 3000th Term Videos
Current, Recent Works, Events Business of Knifemaking Concealed Carry and Knives Skeletonized Knives Best Knife Information and Learning About Knives  
Client's News and Info   Military Knife Care Serrations Cities of the Knife Links
Who Is Jay Fisher?   The Best Combat Locking Sheath Knife Sheaths Knife Maker's Marks  
Testimonials, Letters and Emails     Knife Stands and Cases How to Care for Custom Knives Site Table of Contents
Top 22 Reasons to Buy   Tactical Knife Sheath Accessories Handles, Bolsters, Guards Knife Making Instruction  
My Knifemaking History   Loops, Plates, Straps Knife Handles: Gemstone Larger Monitors and Knife Photos  
What I Do And Don't Do    Belt Loop Extenders-UBLX, EXBLX Gemstone Alphabetic List New Materials  
CD ROM Archive   Independent Lamp Accessory-LIMA Knife Handles: Woods Knife Shop/Studio, Page 1  
Publications, Publicity   Universal Main Lamp Holder-HULA Knife Handles: Horn, Bone, Ivory Knife Shop/Studio, Page 2  
My Curriculum Vitae   Sternum Harness Knife Handles: Manmade Materials    
Funny Letters and Emails, Pg. 1 Blades and Steels Sharpeners, Lanyards Knife Embellishment     
Funny Letters and Emails, Pg. 2 Blades Bags, Cases, Duffles, Gear    
Funny Letters and Emails, Pg. 3 Knife Blade Testing Modular Sheath Systems  
Funny Letters and Emails, Pg. 4 440C: A Love/Hate Affair PSD Principle Security Detail Sheaths      
Funny Letters and Emails, Pg. 5 ATS-34: Chrome/Moly Tough
Funny Letters and Emails, Pg. 6 D2: Wear Resistance King        
The Curious Case of the "Sandia" O1: Oil Hardened Blued Beauty        
The Sword, the Veil, the Legend Elasticity, Stiffness, Stress,
and Strain in Knife Blades
   
Professional Knife Consultant Heat Treating and
Cryogenic Processing of
Knife Blade Steels